2.4619
|
Material No. |
2.4619 |
|
EN symbol (short) |
NiCr22Mo7Cu |
|
AISI/SAE |
G-3 |
|
UNS |
N
06985 |
|
AFNOR |
— |
|
B.S. |
— |
|
alloy |
alloy G-3 |
|
Registered work's label |
Inconel® G-3, Nicrofer® 4823hMo,
Hastelloy®alloy G-3 |
|
Standards |
— |
Description
Material
2.4619 (alloy G-3) is a chemically stable and
high-temperature resistant alloy, which is well weldable
and has a good stability against grain border corrosion
in welded condition. Alloy 2.4619 (alloy G-3) is used in
flue gas scrubbers, and with phosphoric and sulphuric
acid.
Our product range in 2.4619 (alloy G-3) are tubes and
pipes, fittings and flanges, accessories.
Chemical composition ¹
|
C
≤ % |
Si
≤ % |
Mn
≤ % |
P
≤ % |
S
≤ % |
Cr
% |
Mo
% |
Ni
% |
V
% |
|
0,015 |
1,5 |
1,0 |
0,025 |
0,015 |
21,0-23,5 |
6,0-8,0 |
rest |
|
Nb ²
% |
Ti
% |
Al
% |
Co
≤ % |
Cu
% |
N
% |
Fe
% |
Ce
% |
W
≤ % |
|
0,5 |
|
|
5,0 |
1,5-2,5 |
|
18,0-21,0 |
|
1,5 |
|
¹ in accordance with Key
to Steel 2001 ² Nb+Ta |
Special characteristics
|
|
Temperature range |
Density kg/dm³ |
Hardness |
|
annealed typically up to 600° |
8,14 |
|
Welding filler
|
|
covered rod electrode 2.4621 |
Main fields of application
(depending on the
specific conditions of use)
|
|
flue gas scrubbers, chemical industry,
phosphoric acid, sulphuric acid, acetic
acid, petrochemical plants, production of
fertilisers |
|
(all aforementioned
specifications serve as a general
orientation and have to be reviewed
depending on the specific conditions of use) |
The
contents, results, and technical data from this site may
not be reproduced either electronically,
photographically or substantively without permission
from Metserve International.
Copyright © 2007 Metserve Metallurgical Consultancy
Tel:
+27-11-7041010 Fax +27-11-4622386
Email: metserve@pixie.co.za
www.metserve.co.za |
