| - |
Standard Reference |
Title |
| Materials |
| 1 |
BS1452:1990 |
Specification for flake
Graphite Cast Iron. |
| 2 |
BS2789:1985 |
Specification for
spheriodal graphite or nodular graphite Cast Iron |
| 3 |
BS6681:1986 |
Specification for malleable
CI . |
| 4 |
BS970 : Part 1 :1996 |
Wrought Steels - Carbon and
Manganese Steels |
| - |
BS970: Part 2:1988 |
Wrought Steels- Direct
hardening alloy steels |
| - |
BS970: Part 3:1991 |
Wrought Steels- Case
Hardening steels- Withdrawn/superseded |
| - |
BS970: Part 4:1970 |
Wrought Steels- Stainless,
Heat Resisting and valve steels - Withdrawn/Superseded |
| - |
BS970: Part5:1972 |
Wrought Steels- Spring
steels- Withdrawn/Revised |
| - |
BS970: Part 6:1972 |
SI metric values for parts
1 to 5 - Withdrawn/Revised |
| 5 |
BS1449 Part 1 |
Steel Plate , sheet and
strip |
| - |
BS14449 Part2 |
Stainless and Heat
Resisting steel, plate, sheet and strip |
| 6 |
BS1440 |
Copper alloy Ingots and
Castings |
| 7 |
BS EN10051 |
Carbon Steel Plate and
Strip |
| 8 |
BS EN10083: |
Quenched and Tempered
Steels |
| 9 |
BS EN 100113: Parts 1 to 3 |
Hot rolled products in
weldable fine grain structural steels |
| 10 |
BS1470 |
Wrought Aluminium and
Aluminium Alloys. Plate Sheet and strip |
| 11 |
BS1471 |
Wrought Aluminium and
Aluminium Alloys.Drawn Tube |
| 12 |
BS1474 |
Wrought Aluminium aand
Aluminium alloys ,. Bar, extruded round tube and sections |
| 13 |
BS1501 |
Steels for fired and
unfired pressure vessels - Plate |
| 14 |
BS1503 |
Steels for fired and
unfired pressure vessels - Forgings |
| 15 |
BS1449-1.1::1991 |
Steel Plate , sheet and
strip , Carbon and carbon manganese plate,sheet and strip.
General specification |
| 16 |
BS2633:1987 |
Specification for Class 1
welding of ferritic steel pipework for carrying fluids |
| 17 |
BS2971:1991 |
Specification for Class 2
welding of carbon steel pipeword for carrying fluids |
| 18 |
BS EN25817 |
Arc Welded joints in steel:
guidance on quality levels for imperfections |
| 19 |
BS EN10027-1: 1992 |
Designation Systems for
Steel : Part 1 Steel Names, Principal Symbols |
| - |
BS EN10027-2: 1992 |
Designation Systems for
Steel : Part 2 Steel Numbers |
| 20 |
BS EN10079 |
Definition of Steel
Products |
| 21 |
BS EN10029: |
Tolerances on Hot Rolled
steel plate sections 3mm thick or over |
| 22 |
BS1449-1.8:1991 |
Steel Plate , sheet and
strip , Carbon and carbon manganese plate,sheet and strip.
Specification for hot rolled narrow strip based on formability. |
| 23 |
BS1449-1.14:1991 |
Steel Plate , sheet and
strip , Carbon and carbon manganese plate,sheet and strip.
Specification for hot rolled narrow strip supplied in a range of
conditions....... |
| 24 |
BS EN10025: |
Hot Rolled Structural
Plates |
| 25 |
BS3100:1984 |
Specification for steel
castings for general engineering purposes |
| 26 |
BS1504:1984 |
Specification for steel
castings for pressure purposes |
| 27 |
BS2803:1980 |
Specification for
Pre-Hardened and Tempered Carbon and Low alloy round steel wire
for gen. eng. purposes |
| 28 |
BS5216:1991 |
Specification for patented
cold drawn steel wire for mechanical springs |
| 29 |
BS 4-1:1993 |
Structural steel sections.
Specification for hot-rolled sections (taper flange joists and
channels) |
| 30 |
BS EN 10210-1:1994 |
Hot finished structural
hollow sections of non-alloy and fine grain structural steels.
Technical delivery requirements |
| 31 |
BS EN 10210-2:1997 |
Hot finished structural
hollow sections of non-alloy and fine grain structural steels.
Tolerances, dimensions and sectional properties |
| 32 |
BS EN 10055:1996 |
Hot rolled steel equal
flange tees with radiused root and toes. Dimensions and
tolerances on shape and dimensions |
| 33 |
BS EN 10056-1:1999 |
Specification for
structural steel equal and unequal angles. Dimensions |
| 34 |
BS EN 10279:2000 |
Hot rolled steel channels.
Tolerances on shape, dimension and mass |
| 35 |
BS EN 10025:1993 |
Hot rolled products of
non-alloy structural steels. Technical delivery conditions |
| 36 |
BS 2994:1976 |
Specification for cold
rolled steel sections. |
| 37 |
BS 5950-1:2000 |
Structural use of steelwork
in building. Code of practice for design. Rolled and welded
sections |
| Design
specification |
| 1 |
BS 8888:2000 |
Technical product
documentation (TPD). Specification for defining, specifying and
graphically representing products |
| 2 |
BS ISO 128-20:1996 |
Technical drawings. General
principles of presentation. Basic conventions for lines |
| 3 |
BS ISO 128-21:1997 |
Technical drawings. General
principles of presentation. Preparation of lines by CAD systems |
| 4 |
BS ISO 128-22:1999 |
Technical drawings. General
principles of presentation. Basic conventions and applications
for leader lines and reference lines |
| 5 |
BS ISO 128-23:1999 |
Technical drawings. General
principles of presentation. Lines on construction drawings
Current 20 pgs. |
| 6 |
BS ISO 128-24:1999 |
Technical drawings. General
principles of presentation. Lines on mechanical engineering
drawings Current 20 pgs. |
| 7 |
BS EN ISO 2162-1:1996 ( BS
308-1.17:1996) |
Technical product
documentation. Springs. Simplified representation Current 20
pgs. |
| 8 |
BS EN ISO 2162-2:1996 ( BS
308-1.18:1996) |
Technical product
documentation. Springs. Presentation of data for cylindrical
helical compression springs Current 20 pgs. |
| 9 |
BS EN ISO 2162-3:1996 ( BS
308-1.19:1996) |
Technical product
documentation. Springs. Vocabulary Current |
| 10 |
BS EN ISO 2203:1997 ( BS
308-1.16:1997) |
Technical drawing.
Conventional representation of gears |
| 11 |
BS 4235-1:1972 |
Specification for metric
keys and keyways. Parallel and taper keys |
| 12 |
BS 4235-2:1972 ( ISO
3912-1977) |
Specification for metric
keys and keyways. Woodruff keys and keyways |
| 13 |
BS ISO 406:1987 |
Technical drawings.
Tolerancing of linear and angular dimensions keyways |
| 14 |
BS4500/ BS EN20286 |
ISO Limits and Fits |
| 15 |
BS EN ISO 4287:2000 |
Geometrical product
specification (GPS). Surface texture. Profile method. Terms,
definitions and surface texture parameters Current 40 pgs. |
| 16 |
BS EN ISO 5458:1999 |
Geometrical product
specifications (GPS). Geometrical tolerancing. Positional
tolerancing Current 20 pgs. |
| 17 |
BS ISO 5459:1981 |
Technical drawings.
Geometrical tolerancing. Datums and datum-systems for
geometrical tolerances Current 24 pgs. |
| 18 |
BS EN 22768-1:1993 ( ISO
2768-1:1989) |
General tolerances.
Tolerances for linear and angular dimensions without individual
tolerance indications Current 24 pgs. |
| 19 |
BS EN 22768-2:1993 ( ISO
2768-2:1989) |
General tolerances.
Geometrical tolerances for features without individual tolerance
indications Current 20 pgs. |
| 20 |
BS ISO 1302:1992 |
Technical drawings. Method
of indicating surface texture Current 22 pgs. |
| 21 |
BS308 :Parts 1-Withdrawn |
Engineering Drawing
Practice : General Principles |
| - |
BS308 :Parts 2-Withdrawn |
Engineering Drawing
Practice : Dimensioning and Tolerancing |
| - |
BS308 :Parts 3-Withdrawn |
Engineering Drawing
Practice : Geometric Tolerancing |
| 22 |
ISO9001(1994)
|
Quality Systems -
specifications for design, development, production, installation
and servicing. |
| - |
ISO 9002(1994) |
Quality Systems -
specifications for production, installation and servicing. |
| - |
ISO 9003(1994) |
Quality Systems -
specifications for final inspection and test |
| 23 |
BS5760:Pt 0: 1993 |
Introductory guide to
reliability |
| - |
BS5760:Pt 2: 1994 |
Guide to assessment of
reliability |
| - |
BS5760:Pt 3: 1993 |
Guide to reliability
practices: examples |
| - |
BS5760:Pt 5: 1991 |
Guide FMEA and FMECA |
| - |
BS5760:Pt 6: 1993 |
Guide to Fault Tree
Analysis |
| 24 |
BS EN 292 Pt 1 and Pt 2 |
Safety of Machinery Basic
concepts , general principles for design |
| 25 |
BS 499-1:1991 |
Welding terms and symbols.
Glossary for welding, brazing and thermal cutting |
| 26 |
BS EN 22553:1995
ISO 2553:1993 |
Welded, brazed and soldered
joints. Symbolic representation on drawings. |
| 26 |
BS EN ISO 4063:2000
|
Welding, brazing, soldering
and braze welding of metals. Nomenclature of processes and
reference numbers for symbolic representation on drawings |
| 26 |
BS 7373:1998 |
Guide to the preparation of
specifications |
| Piping/ Pumps/
Construction |
| 1 |
BS EN286-1:1991 |
Simple unfired pressure
vessel designed to contain air or nitrogen |
| 2 |
TEMA 1985 |
Standards for Design and
Construction of Heat Exchangers |
| 3 |
BS5500: 1997 |
Specification for unfired
fusion welded pressure vessels |
| 4 |
ISO 2548:1973 BS5316 Pt1
1976 |
Specification for
acceptance tests for Centrifugal mixed flow and axial pumps.-
class C tests |
| 5 |
ISO 3555:1977 BS5316
Pt2:1977 |
Specification for
acceptance tests for Centrifugal mixed flow and axial pumps.-
class B tests |
| 6 |
BS4504-3.1:1989 |
Circular Flanges for pipes
valves and fittings (PN designated). Steel, cast iron and copper
alloy flanges |
| - |
- |
Circular Flanges for pipes
valves and fittings (PN designated). Copper alloy and composite
flanges |
| 7 |
BS5950:Pt1:1989 |
Structural Use of Steelwork
in Building. |
| 8 |
ISO 5198:1977 BS5326
Pt3:1988 |
Specification for
acceptance tests for Centrifugal mixed flow and axial pumps.-
Precision Class Tests |
| 9 |
API 610 8th ed. 1995 |
Centrifugal Pumps for
general and refinery service |
| Machine Components |
| 1 |
BS6613:1991 ISO4863 |
Methods of specifiying
resilient shaft couplings |
| 2 |
BS3170 |
Specification for flexible
couplings for power transmission |
| 3 |
BS7620:1993 |
Specification for
industrial belt drives - dimensions of pulleys and v-ribbed
belts of PH, PJ, PK, PL and PM profiles |
| 4 |
BS4548:1987 |
Specification for
synchronous belt drives for industrial applications. |
| 5 |
BS4235:Pt 1:1986 |
Parallel and Taper Keys |
| 6 |
BS3692: 1967 |
Specification for ISO
metric precision hexagon bolts, screws and nuts. Metric units |
| 7 |
BS 4320:1968 |
Specification for metal
washers for general engineering purposes. Metric series |
| 8 |
BS 6322-1: 1982
ISO 4759/1:1991 |
Tolerances for fasteners:
Specification for tolerances of bolts, screws,nuts.. |
| - |
BS 6322-3: 1982
ISO 4759/3:1991 |
Tolerances for fasteners:
Specification for tolerances of plain washers .. |
| 9 |
BS 1936:Part 2:1991 |
Undercuts and runouts for
screw threads: part 2. specification for ISO metric threads. |
| 10 |
ISO 1328:1975 |
Parallel involute gears -
ISO system of accuracy. (Related to BS436) |
| 11 |
BS 2573-Pt 1:1983 |
Rules For Design of Cranes.
Specification for Classification, stress, Calculations and
design criteria for structures |
| - |
BS 2573-Pt 2:1980 |
Rules For Design of Cranes.
Specification for Classification, stress, Calculations and
design of Mechanism |
| 12 |
BS6105:1981
ISO 3506:1979 |
Corrosion Resistant
stainless steel Fasteners. |
| 13 |
BS3580:1964 |
Guide to Design
Considerations of The Strength of Screw Threads |
| 13 |
BS3580:1964 |
Guide to Design
Considerations of The Strength of Screw Threads |
